Enhance the nighttime curb appeal of your home—and add a measure of safety and security—with low-voltage Outdoor lighting. These exterior-grade fixtures are typically placed along walkways and driveways, but they’re also ideal for illuminating steps, trees, stonewalls, fences and other prominent landscape features. Here are several guidance in how to installing an outdoor lighting with led lighting.
The first thing should considering before installation is the allow the basic rules for outdoor lighting installations, include checking local code regarding outdoor lighting. Don't forget to always use type UF cable for underground wiring. The UF implies that there must be a fuse breaker inside the house at the starting point of the underground wiring installation.
Weatherproof switches are another important thing that are required, its a good idea to prepare an outlet boxes in both flush-mount or surface mount styles. Before you begin, shut off the electrical current at the main switch box, mount a breaker or a fuse box in a location similar to the underground wiring installation.
Dig a hole about 2" deep with an ordinary post hole digger or tiling spade, run cable up trough the lamppost, then fill the hole with about 12" of concrete mix. Insert the lamppost into the concrete mix in an upright, plumb position. every outdoor lighting lamp part exposed to the touch must also be grounded.
Many of the newer outdoor lights come equipped with photoelectric eyes or motion sensors or both. If your light does not have this type of control built in, you may wish add a timer, permanent timer switches are readily available and can be pre-set for any on/off times.
0 comments:
Speak up your mind
Tell us what you're thinking... !